Club 80-90 Forums

I want to run my propex and a gas burner off one bottle, how do i do this? Can you get a fitting to run 2 regulators off one bottle?

I'm guessing you cant run the two items off one regulator?

Chris

You can run both from the one regulator. The regulator will regulate the pressure but allow as much gas through as you need.

I ran three appliances off one gas bottle, fridge, two burner and grill stove and gas heater.
No worries.

you can buy a combination tap unit with 3 outlets like the westys have. seen them on ebay

Surely they would be fixed appliances and the "T"ing would be in the permanent pipe work! You only want to be making one joint and using one flexible pipe when you change bottles. And I agree one regulator will almost certainly run three appliances simultaneously.
Cheeers
Wolfie

Citizen Smith wrote:Surely they would be fixed appliances and the "T"ing would be in the permanent pipe work! You only want to be making one joint and using one flexible pipe when you change bottles. And I agree one regulator will almost certainly run three appliances simultaneously.
Cheeers
Wolfie

I was running 5 appliances of one reg. in my merc 508d (- now down to 4) with no problems. As said all the tee-ing is done in your fixed pipe work.

don't forget the stop "cock" for each appliance

Search for lpg or gas manifold on EBay.

Thats the kiddie! cheers guys, anyone know any good suppliers of 8mm copper tubing?

Chris

Chrissyt wrote:Thats the kiddie! cheers guys, anyone know any good suppliers of 8mm copper tubing?

Chris

Try Cak Tanks :- http://www.caktanks.co.uk/ they do the manifolds, 8mm pipe and all the fittings you'll need.

Ian.

Cheers ian, i've tried before to email and ring these guys for some other bits but they never seem to answer

chris

I found them extremely easy to deal with and fast delivery too Still, they may have been having an 'off' day

Ian.