Club 80-90 Forums

I am watching a Bench seat currently listed on ebay to fit in place of my single passengers seat, this is so my daughter may ride up front with the wife and I.

I have emailed the guy and asked if he has the lap belt, support leg or anything else I would need to fit this in my van.

He said "No what you see is all I have"

This is the ebay add.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0346479730" onclick="window.open(this.href);return false;

He states it is from a panel van, would this be suitable to use in my van? Does a bench seat still fit on runners? Or is it fixed?

I have seen other bench seats listed on ebay but with no fabric on the back - I assume these were used in pick ups not panel vans?

Anything anyone knows I don't and would like to point out before I jump in.

Thanks In Advance.

Link don't work.............

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0346479730" onclick="window.open(this.href);return false;

or

Item No :- 220346479730

First of all inquire if they're out of a RHD or LHD,ie. the same as yours, or the runners will be in the wrong place.
It just slides into the same runners, but you'll need to support the backrest.

Mine was supported by the bulkhead as it wasn't a walkthru, but I think some mayhave had a bar from the b-pillar to the floor?

If you need a lapbelt I should have one kicking round somewhere.

The link won't work - for some reason when they are copied and pasted two digits are transposed (cig should read cgi and eaby should read ebay). I had this problem myself when I posted a link on another forum.