Page 1 of 1
how heavy??
Posted: 18 Jan 2009, 08:41
by armyphil
is a 1.6td with crate round it do you think????
i am thinking bout 70kg is that bout right cheers
Re: how heavy??
Posted: 18 Jan 2009, 12:41
by toomanytoys
I'd have thought a good bit more than that... its iron and steel.... a wbx weighs enough........and its alloy and steel....
Re: how heavy??
Posted: 18 Jan 2009, 15:15
by armyphil
i know but i can lift it through the engine lid so thought it couldnt be that heavy??
hope not anyways postage company is gonna pick it up soon??
Re: how heavy??
Posted: 18 Jan 2009, 17:11
by A KIRK
At least 100Kg with a proper wooden crate as the crate would weigh 20-30KG on its own, have you got any bathroom scales you could try to rest it on to get an idea of weight?
Re: how heavy??
Posted: 18 Jan 2009, 17:21
by armyphil
only glass ones dont think the wife would be to happyif they broke!! shes still on that i wanna get fit in the new year campaign!!!
Re: how heavy??
Posted: 18 Jan 2009, 17:55
by Aidan
bare wbx is 75kg - I have weighed one and lifted one about 6 " but I am a wimp I know.
TD will be twice that I reckon
Re: how heavy??
Posted: 18 Jan 2009, 18:47
by Mr Bean
Take a length of strong timber like a scaffold plank, mark it off in ten equal divisions and place your suitably protected bathroom scales under one end and a brick under the other. Place the engine on the marks in succession starting at the brick. Stop when you feel you may endanger the scales. At that point a simple calculation will give the actual weight of the engine. ie half your engine weight will be shown at mark number five or say at number three 3/10 of your engine weight will be shown.
Cheers
wolfie
(Best not let SWMBO spot you carrying the scales out to the garage)
Re: how heavy??
Posted: 18 Jan 2009, 19:19
by armyphil
Citizen Smith wrote:Take a length of strong timber like a scaffold plank, mark it off in ten equal divisions and place your suitably protected bathroom scales under one end and a brick under the other. Place the engine on the marks in succession starting at the brick. Stop when you feel you may endanger the scales. At that point a simple calculation will give the actual weight of the engine. ie half your engine weight will be shown at mark number five or say at number three 3/10 of your engine weight will be shown.
Cheers
wolfie
(Best not let SWMBO spot you carrying the scales out to the garage)
that is probably the coolest most long winded way of weighing something but i did it and it weighs a total of 73 kg's dry!!!
in the end though a heavy duty carpet tared then lifted the lump onto them( the engine not the wife)
Thamks for advice guys