Page 1 of 1
clutch problem?
Posted: 23 Dec 2008, 17:35
by chris.S
ok well i have just fitted a working donor lump in to my van got it running went to go for a road test but cant select any gear when its running we bled the clutch and can see the slave cylinder moving.
i cant remember seeing a clutch release bearing well i didnt check like a fool could that be the problem or something else?
Re: clutch problem?
Posted: 23 Dec 2008, 17:55
by Fritz
1st question is ;;;;;;;;;;;;; Was the new lump supplied with a fitted clutch ?
If it was then the centre plate may have stuck to the flywheel ,hence the reason why the clutch isn't clearing and you can't get any gears.
Regards
Fritz,,,,,,,,,,,,,,,,
Re: clutch problem?
Posted: 23 Dec 2008, 17:57
by chris.S
ha ye there was a clutch fitted.
Re: clutch problem?
Posted: 24 Dec 2008, 18:24
by chris.S
Fritz wrote:1st question is ;;;;;;;;;;;;; Was the new lump supplied with a fitted clutch ?
If it was then the centre plate may have stuck to the flywheel ,hence the reason why the clutch isn't clearing and you can't get any gears.
Regards
Fritz,,,,,,,,,,,,,,,,
you were correct mate all sorted and driving now finally
Re: clutch problem?
Posted: 24 Dec 2008, 23:44
by Fritz
Whey Hey,,,,,,,,,,,
Regards
Fritz,,,,,,,,,,,,,,,,,,,,,,,,,,,,