Club 80-90 Forums

With my old exhaust i cut the rear valence (see pic) Now i have bought some grille mesh to replace it. The question is what will be the best way of attaching it? I was going to weld it but just checked and its alloy.

Pop rivets

I have thought a about pop rivets but will need to use filler to cover them.

Use a resin to attach it to the rear of the valance?

Hi mate , when I did my dashtidy I used liquid metal to stick the 90 deg fixings to the dashtidy it does say on the tube that it is as strong as weld , don't know if it is but i couldn't prize it off .

http://www.diy.com/diy/jsp/bq/nav/nav.j ... ts&x=0&y=0" onclick="window.open(this.href);return false;

Use sikaflex or tigerseal, will take you all of one minute, just hold securly with some bulldog clips to allow it to set. Can always slice it off at a later date with a craft knife.

Cheers peeps. Still planning.

evostik liquid metal , as the man sez . Great stuff.
jaylo

Or Stuff called Stickall, tool stations £5! it really sticks all!

how bad would it look if you chopped the whole thing off? - could be funky but could also be horrid!

This is how it looks now!

Doesn't the bumper mostly hide it?

Melvin

Not really, its just below it.

Caravelle Bumper?