Page 1 of 1
Anyone modified their wipers to have integral washers?
Posted: 01 Dec 2008, 21:14
by ringo
Its quite a common upgrade on landrovers to plumb in the washer jets along the wipers. This means that the water goes on the window and not above it.
These are available for landy's:
http://tiny.cc/BvOwZ
Has anyone done this on a T25?
Just wondering if i should give it a go - cause my washers really annoy me at this time of the year...
Ringo
Posted: 01 Dec 2008, 21:18
by syncroand101
I fitted the twin washer jets. i.e. two holes. Much better spread for the size of windscreen!
Posted: 01 Dec 2008, 21:30
by jamesc76
I looked at doing this using wipers from a truck as the washers are on the arms but never got round to it plus where the washer jet is its a bit far to the arm of the wiper to run the tube very interested if you sus it out tho buddy!
Posted: 01 Dec 2008, 22:14
by ELVIS
everyone i know uses kunifer , .6mm drill and cable ties!
probably find they are pug 406 arms or similar .
Posted: 01 Dec 2008, 22:20
by ringo
Yes - thats the same sort of gig as the landy boys use..
Trouble is with pug blades - i doubt they are big enough for a van?
Ringo
Posted: 01 Dec 2008, 22:46
by ELVIS
ok , merc sprinters then
double jet from busman.be is the daddy!
Posted: 01 Dec 2008, 23:01
by ringo
ELVIS wrote: double jet from busman.be is the daddy!
LOL - Just about to ask Jake that very question!
Sweet - will have a look at those.
Cheers
Ringo
Posted: 01 Dec 2008, 23:04
by ELVIS
are an excellent fit - as if made for a T3!
deffo a hoooooooooge improvement.