Page 1 of 1
Very High revs
Posted: 20 Nov 2008, 17:01
by kev706
Help needed please. 1984 19 DG Pierburg 2e3, carbs been off for a clean and check. since its been back on the revs seem to stick. Turn the engine off ,restart its ok untill you go past half throtle then sticks again. Its not the cable its something in the carb. Thanks
Posted: 20 Nov 2008, 22:37
by Fritz
Make sure the secondary throttle plate and or the control mechanism is working as it should.
Regards
Fritz,,,,,,,,,,
Posted: 20 Nov 2008, 22:40
by kevtherev
Broken or wrongly fitted return spring on the fast idle
high revs
Posted: 21 Nov 2008, 16:30
by kev706
Thanks guys i'll check those tomorrow.
Posted: 24 Nov 2008, 16:02
by pmulcahy
Leaking float valve?
hi
Posted: 24 Nov 2008, 20:18
by billy739
location? please state on your post , as could pop over if your next door!
Posted: 24 Nov 2008, 22:10
by Rozzo
classic example of "if it aint broke keep fixing it till it is"
