Club 80-90 Forums

Just looking into wiring up my 1Y, pump doesn't seem to have the black box talked about on this forum. I seem to just have a black wire coming off the back, that joins in to a round connector, along with a few wires coming from the water cicuit.

how do I wire this 1y into mt crewcab

Cheers

NEil

My original 1Y engine had the black box fitted, which I broke off to reveal a regular solinoid beneath. But that pump was knackered. I found another 1Y in a scrappy fitted in a golf with an identical pump fitted but no blackbox to remove. Does that help.

I was incredibly sceptical about the wiring of a 1Y as the IY pump has loads of wires and electrical bits and bobs. But its is only the one single solinoid you need to wire in.

Good Luck.

Thanks for the info, looks like I'II just go for the black wire off the solenoid, see what happens

Cheers

NEil

when i fitted my 1y into marladys 1.6d van....every wire connected up to every connector perfectly.....i didnt have the black box thingy.....and i used the 1.6 alternator to save messing with the wiring....probably not the best idea ive ever had but still works well....just have to adjust it every 5-6 months when it squeels a bit

Thanks, I'II check my wiring out on the crewcab

Cheers

Neil