Club 80-90 Forums

Hi all
I have lowered my van (1989 1.9 DG Minibus) and have a 15mm lean to the drivers side at the back. I have changed the springs over and it still leans to the same side by 15mm. I have tried the original springs and it leans to the same side by 5mm. All changes where done on the same flat floor. Can anybody explain, or give me any ideas as to what to check. The springs are AVO 50mm.
Cheers Chadde

See this kit from Baxter, it`s the answer

http://www.brickwerks.co.uk/index.php?p ... t&Itemid=6

yes he is spot on. i fitted this to my westy and no more lean!!

Thanks for your input, but it's not got everything on one side, it's a minibus and why would it lean less on standard springs and more on lowering spring. I thought they were stiffer?


Chadde