Page 1 of 1
What model Alfa
Posted: 23 Oct 2008, 12:16
by The Reverend Pimp Daddy
Has the twin Delorto carbs...that I can use on my 2.0 ltr AC
I know i have to get the manifods sorted off a type 1
and sort out the linkage
Posted: 23 Oct 2008, 12:32
by pouch
I bought mine from a guy in Italy. he only posts on Italian ebay, but is easy to contact and speaks good english (he may be English)
I think his ebay name was Alfa1750
I bought some DRLA 40's and it has made a huge difference, I now tow my Caterham to race meets behind the Van
You can go with DRLA 36's as well.
Loads of threads on best place to buy manifolds and linkages.
Posted: 23 Oct 2008, 18:13
by Syncro G
Guess that'll be one of the boxer powered alfas, the last of which was the 33 I think so maybe one of them or something older? Even 33's have mostly desolved now so you might struggle in the UK.
Posted: 23 Oct 2008, 20:00
by jason k
you need the drla dellortos either 36 mm or 40mm
the important bit is the drla which earmarks them as a downdraught carb.
type one manifolds will not fit, I had mine (type 4)from csp and the throttle linkage
steer clear of any carbs that have been acid dipped, also some that have been media blasted have galleries full of crud. best to find a scabby set have em sonic bathed and refit em with a rebuild kit.
stateside tuning normally have matched sets for sale and can work out cheaper too......