Club 80-90 Forums

[img:320:240]http://www.zen89858.zen.co.uk/temp/connector.jpg[/img]

Sorry a bit blurred, mobile camera! Tried maplins but no luck.

If I can find one it will make my job very easy and reversible

Many thanks,

J

Are they just insulated male and female 'spade' connectors - it's hard to tell from the photo as you can't see in the 'front' of them. Just the one cable core into each?

Try a Computer shop. They might have one.
Phredd

If its round pinned they llok very simular to computer power conectors but are actully slightly different. If they are flat blades, you can get them from Vehicle wireing products (single blade conectors or single covers, eather is very simular and interchangerble with VW ones). Another option is to take a bag to an autobreaker, find I mk2 golf or other contempory motor and cut all the conecotors out of it - while your at it colect some fuses and relays too - won't cost alot and its OEM logo'd conections so if your tidy no one would ever know its been changed.

What circuit is is actully off? Can't think of one with a latch like that off the top of my head.

Might be easier snipping them off and using some red male and female crimped bullet connectors like these;

http://www.rapidonline.com/Cables-Conne ... rimp/75811

http://www.rapidonline.com/Cables-Conne ... rimp/75810

If the ends are square I have a bucket load of them . So if you want to make up a new set happy to send you a set . If you want to connect to the existing ones you will need to buy the same type . What you doing with it.

Regards

Perro

Sorry guys for the lack of response, been servicing the camper and trying to find camera battery charger for a clearer picture. Give me a few hours and I will take another pic. The connectors are on the ISO stereo block which is pretty handy as I can disconnect the red wire to stop in draining my battery over a period of days! A different thread

Hi,

Try these guys at Vehicle Wiring Products Ltd

http://www.vehicle-wiring-products.eu/V ... ectors.php

They should have what you need.

VanDiesel wrote:Hi,

Try these guys at Vehicle Wiring Products Ltd

http://www.vehicle-wiring-products.eu/V ... ectors.php

They should have what you need.

i use these guys loads (about 5 mins from me ) if they aint got it then no one will!!!

sorry for delay. here are some better pics showing the male and female connectors. I have already had a look through the suggested website with no luck and probably agree I need to cut them out and use somik else

[img:704:528]http://www.zen89858.zen.co.uk/temp/connector.jpg[/img]

[img:704:528]http://www.zen89858.zen.co.uk/temp/connector2.jpg[/img]

Take care,

Jamie

that we be a no then Don't have time to change it now, so will keep disconnecting over night till I fit the inline switch.