Club 80-90 Forums

Hi guys,

The pin that should be in the part I've pictured is missing on both sides of my van, and because these pins are missing, the doors will open too far and is putting stress on the hinges.

I'm careful not to let this happen too often, but still does now and again, and as these pins have been missing since I bought the van, I thought it was about time I got it sorted

The only problem is, I don't know what the correct name is for these pins. If some kind person can let me know what this part is called, I'll have a look on the net and see if I can buy a couple.

[IMG:400:179]http://www.muchos.co.uk/members/Jaymo1970/DoorPin.gif[/img]

Youd be wanting a 'clevis pin' this is like a short nail with a hole drilled through it for a split pin,

Might be easiest if I have a root about and post you a coule as its not worth the effort/time to source one as they is like 10pence a piece!
PM me your addy
Mike

or wang a m4 or m6 nyloc nut and bolt which ever fits in it ?????? or what ever you have laying about !

according to http://www.vagcat.com/ its called a fillister hd bolt. m6x15 part no 211837257B

What can I say, all very helpful as usual.

Thanks guys