Page 1 of 1
adjustable suspension
Posted: 03 Aug 2008, 19:17
by ..lee..
anyone looked in to fitting coil over suspension to a syncro, looks possible to me.
after setting mine up and now fitting a roo bar to the front its dropped a little so its start again time
cheers lee.
Posted: 03 Aug 2008, 19:30
by Ye Olde Syncrospares
its already coil over,sounds like you need tougher springs.
Posted: 03 Aug 2008, 19:58
by ..lee..
cj uprated springs would be good, but what i was thinking of was to convert the std diameter springs to 2 1/4 inch springs with adjustable platforms like we use on the rally cars.
there is a huge choice of spring lengths and rates, and the threaded tubes and adj platforms are readily available.
so if it would work it would be a case of cutting off the origonal spring platform and slipping over the threaded tube the only hiccup i could see is mounting the top of the spring in the chassis.
lee.