Club 80-90 Forums

I got home from work and parked and as i walked past the bus water was every where. I can't find any leaks. I have filled it up again approx 6 ltrs and bled it. Have been running it temp gauge won't go past 85 and no water leaking but the fan doesn't appear to be coming on either.
Has anyone got any idea's? Cheers.

Did the radiator get hot at all ??????

The rad is getting warm but it's not overheating or leaking.

I plugged in the green test connectors and everything worked as it should including the fan. The fan isn't coming on at all under normal conditions.

i didnt use the subaru fan relay i kept all that standard vw! I take it there is no leaks nut have u looked whilst its getting hot i've had leaks from tiny holes that only show up when hot??? Plus where you sure you got all the air out the system the first time ??

Not sure about the first time but it has been running well although he had a nightmare bleeding it. . It spewed it all in about 50 yrds in the carpark. I have been running it and checked clips and pipes with no luck. Tony

James is this right it looks wrong to me.
[IMG]http://i220.photobucket.com/albums/dd17 ... GI0069.jpg[/img]

dunno with out takeing my rammed full glove bow out but i think the vw fan relay is missing???

Do you know if my van would have a one or two speed fan because I have two sets of instructions for the RJES wiring loom?

what year is your van??? how many wires are on the plug on rad??

Its an 88 and i believe there are 3. Can check tommorrow for sure.

mines a 1990 and has 3 wires so might be like mine which is 2 speed but i could be wrong mines defo 2 speed tho!

2 speed fan has 3-wire senser. One wire is the 12v feed, other two are seperate feeds out for the 2 speeds.

I think mine must be a two speed as it has three pins in the rad.

Pepperami wrote:James is this right it looks wrong to me.
[IMG]http://i220.photobucket.com/albums/dd17 ... GI0069.jpg[/img]

were is your wiper relay?

jed