Club 80-90 Forums

Hi - have another little problem - the analogue clock wont work when connected to the (14 pin) multiconnector - pin 5 is the live and delivers the correct voltage - The clock itself is getting the voltage so it should work but doesn't -- HOWEVER - when i tested the clock by connecting it directly to a battery on a testbench it works fine - you might say that it's the clock thats knackered but i have 3 clocks and they all do the same - i have checked the contacts on the printed circuit board and they are fine and all the other equipment like oil/temp/lights and indicators work great - this one is stumping me and i'm thinking that if i cannot even fix this then trying to renovate the van it might be beyond me - any help appreciated on this one - thanks and regards - john

but is the negative getting there?

Use the minute hand as a reference point for your temp guage and use a watch.

Haven't most in campers been disconnected due to their infernal ticking

Mine doesn't work but it was at the bottom of my 'to do' list. As soon as I get the van back from the garage I was going to have a look at the clock. Will get back to you. Mine may not work for a completely different reason but who knows?

As Mocki says.......
Your earth should be pin 3 of the14 pin connector I believe.
Mike.