Club 80-90 Forums

like it says, to fit the tacho do i need the relevant printed circut board??
The tacho has a plug in the back with 4 pins and i cant seem to find the male adapter behind the dash to connect into this. The standard board looks like it might accept the fuel and temp as they are fitted 3 oclock and 8 oclock on the tacho whereas the standard board they are at 12 and 6 oclock accordingly.
any suggestions accepted please
Sven

Someone's gotta know!!!!!!!!!!!!!!!!
S

Yes you need the correct circuit board mate
part number 251 919 059 K £60 + vat from VW
I found the exhasut straps in the end, did you still need them ?

mr sven..
for that money i would pop it apart if i were you...
if 4 connections,there will
be positive
neg
illumination
coil pick up

but the £60 is which way???

Thanks for the reply guys.
Aiden, i managed to get a few straps made.....might put a post up to see if anyone else needs any......the guy can knock them out quite cheaply.
Sven

any ideas on price sven,looking at mine dont think theres much life left on them

A tenner a pair richard.....think i'll get a coupla sets knocked up
Sven

sounds good.let me know and i`ll pop round,
got all my bits for the interior now so started to get going on that

Sven,
I would love a pair of exhaust straps, if we are talking about those stainless steel ones that were on a link to eBay, IIRC. £10 a pair PLUS post and packing. Give me your all in price I'm a prompt payer!!
Mike

No Grun theyre not the stainless ones that were on ebay...dont know who that was. These are steel ones...personally stainless straps are a bit of overkill.....steel ones should last for years anyway.
they're for the watercooled engines by the way. If still interested mail me on svenlivesey@hotmail.com Cheers

Thanks Sven,
It was Zippy who advertised on eBay. As my next exhaust is planned to be stainless, I thought straps in the same material would be a nice touch.
Mike