Page 1 of 1

LED BULB CONVERSION KITS

Posted: 26 Jun 2008, 20:58
by PEET
I have been in contact with a number of companies getting LED bulbs for various modded vehicles I have and have found a great straight swap bright design.
I was considering doing an LED bulb 'kit' the front (side lights, indicators)and rear (all of em!)
I was intending on only going with white but other colours for the front would be available.
Anyone interested or shall i just do my own? :lol:

Re: LED BULB CONVERSION KITS

Posted: 26 Jun 2008, 21:09
by hercules
PEET wrote:I have been in contact with a number of companies getting LED bulbs for various modded vehicles I have and have found a great straight swap bright design.
I was considering doing an LED bulb 'kit' the front (side lights, indicators)and rear (all of em!)
I was intending on only going with white but other colours for the front would be available.
Anyone interested or shall i just do my own? :lol:
i mit have a set of them peet i call you have a chat hope all well :wink:

Posted: 26 Jun 2008, 22:09
by R0B
what sort of price.do you recon...

Posted: 27 Jun 2008, 16:00
by PEET
Depends on the amount of bulbs I spose when I work it out its quite a few! The side light bulbs (which maybe be the best seller?) I have received are THE BEST i have found (and I've been contacting quite a few companies for samples etc!), just gotta try the same companies front indicator bulbs (orange and white) and see what prices are indicated (pun intended)

Posted: 27 Jun 2008, 18:12
by jamesc76
As for indicator lights i think you have to get specific ones to be used as indicator bulbs so that the wattage is ok and your indicators dont flash really fast!! (like when a bulb blows)

Posted: 28 Jun 2008, 09:48
by PEET
Don't the indicator ones need a resistor fitted in them to stop that I seem to recall reading somewhere?? Maybe as opposed to a kit I should just deterine which bulbs are which as some of them work out quite expensive! So once I get them all sussed and sorted I shall let you know. I'm away nex week so I'll do it all when I get back!

Posted: 11 Aug 2008, 21:07
by chrisray
Did you get this LED conversion done? If so, any pics.... :D