Page 1 of 1
Broken plug on my electronic dizzy - any advice please
Posted: 13 Jun 2008, 16:48
by irishkeet
Hi
Messing about with the van before heading to bus stopover tomorrow and I have noticed that the small black electrical connecting plug on the side of the electronic distributor is broken, someone has fixed it in the past
Photos below but not great, anyway i slapped on a small bit of araldite and a cable tie
Im wondering if I need a new dizzy?
[img:800:844]
http://www.irishkeet.pwp.blueyonder.co. ... 0dizzy.jpg[/img]
[img:800:640]
http://www.irishkeet.pwp.blueyonder.co. ... 0dizzy.jpg[/img]
thanks
irishkeet
Posted: 13 Jun 2008, 18:11
by Fritz
Ah it will be OK, just keep your eyes open for a better one.
Regards
Fritz,,,,,,,,,,,,,,,,,,,
Posted: 13 Jun 2008, 21:01
by irishkeet
Fritz wrote:Ah it will be OK, just keep your eyes open for a better one.
Regards
Fritz,,,,,,,,,,,,,,,,,,,
thanks Fritz
do you know what model type i should be looking for?
irishkeet
Posted: 13 Jun 2008, 21:55
by Simon Baxter
If things get really bad
Whack a cable tie around the dizzy and hold the plug on, stop the wires fraying and wiggling about.
Posted: 14 Jun 2008, 06:55
by irishkeet
Simon Baxter wrote:If things get really bad
Whack a cable tie around the dizzy and hold the plug on, stop the wires fraying and wiggling about.
Cheers Simon
I have put a tie around it. The repair kit is expensive, how much is a new dizzy?
Posted: 14 Jun 2008, 07:47
by hammy44
hi irishkeet i dont think you will be able to get a new dizzy as i had problems with mine at the start you can get a 009 dizzy or a number like that but they apparently dont work. i think you will have to try to locate a used one from somewhere.
Posted: 14 Jun 2008, 08:17
by irishkeet
hammy44 wrote:hi irishkeet i dont think you will be able to get a new dizzy as i had problems with mine at the start you can get a 009 dizzy or a number like that but they apparently dont work. i think you will have to try to locate a used one from somewhere.
many thanks
any idea what the model/name I should be looking for
thanks
irishkeet
Posted: 14 Jun 2008, 10:30
by bigherb
If you cant repair it the other option is to replace the hall sender in the dizzy which comes with the connector, not cheap though.
http://shop.justkampers.com/product_inf ... ts_id/9479
Posted: 14 Jun 2008, 22:18
by Simon Baxter
Posted: 15 Jun 2008, 09:36
by Aidan
vacuum advance or not ? if not its MV, if vacuum its a DJ. Keith I have both in stock, nearly new and not so but complete and working. Like Simon says cable tie remove vibration problem. I had a hall unit failure on mine destroyed the dizzy and I had a hell of a job finding an MV one at the time, managed to get hold of a second broken one and made a complete broken one and exchanged with Bosch - they are well over a ton if they are still available, but also over time tracked down some s/h units and carry a new one in the van just in case.
Posted: 15 Jun 2008, 18:51
by irishkeet
many thanks for all your replies I will send you a PM Beaker