Page 1 of 1
Mk1 Golf and T25 headlights are they the same??
Posted: 13 Jun 2008, 13:02
by T25-GTi
AS title says, does anyone know if mk1 golf headlights are the same size and fitment as T25 headlights?
Cheers Rob
Posted: 13 Jun 2008, 14:34
by CycloneMike
They are similar but not the same.
They are the same size but the mountings are not exactly the same.
MK1 lights can be fitted to T25 headlamp brackets with some mods by re drilling and filing the mounting points.
I have fitted MK1 lights because I wanted the Angel eye rings (See my garage). After much consideration I cut and welded the golf and T25 brackets together to get the best fit and they are still fully adjustable.
Posted: 13 Jun 2008, 19:15
by T25-GTi
Ok thanks Mike, i may just have a go at fitting some crystal lights, just didnt want to shell out some cash and then not be able to fit them.
I've never seen angel eyes on a T25
Nice one
Posted: 13 Oct 2008, 22:13
by poshbuggers
No drilling required to fit Mk1 lights into van buckets, just trim one clip and mark the adjusters properly.
If you get a set I could do it for you in an hour
Posted: 13 Oct 2008, 22:40
by PEET
Due to the depth of the lens of the angel eyes theres more work involved, did it nearly 4 years ago now...
[IMG:800:599]
http://i63.photobucket.com/albums/h156/ ... ols022.jpg[/img]
Workin on a new conversion now...
Re: Mk1 Golf and T25 headlights are they the same??
Posted: 14 Oct 2008, 13:20
by vic20
That's about how bright my ordinary lights are
Posted: 14 Oct 2008, 20:20
by CycloneMike
These ones did require drilling! But it was a straight forward enough job.
[IMG:640:480]
http://i253.photobucket.com/albums/hh74 ... 008254.jpg[/img]
Posted: 14 Oct 2008, 20:24
by poshbuggers
What did you use for brackets on the inner spots Mike?
I've done a set before but wondered how you had done it.
Posted: 14 Oct 2008, 20:42
by PEET
If you wana nice light change the bulbs to LEDs, makes a big difference...
If they are ignore me!!
Posted: 14 Oct 2008, 20:48
by CycloneMike
The outers are mounted in the standard lamp carriers. For the inners, I didn't have any brackets so I cut some aluminium sheet to make some rings to fit round the holes and bonded them on the back of the grill. Prior to bonding, the rings were drilled and fitted with some bolts to make posts for the golf inner lights, which were fitted using an assortment of washers and nylocks.
