Page 1 of 1
leaking master cylinder brake light
Posted: 09 Feb 2006, 07:55
by hanloncole
just can't get the thread bewtenn the new master cylinder and the new rake light to stop leaking. Any ideas, don't want to just keep tightening it. Thread loack probably won't work as its now covered in brake fluid
thanks
Simon
Posted: 09 Feb 2006, 08:45
by Mocki
did you use a new fibre washer?
ptfe tape ?
fibre washer
Posted: 09 Feb 2006, 16:15
by hanloncole
there is no fibre washer between the brake light switch and the master cylinder, not on ETKA or in any manual for Type 25, could try PTFE tape but it shouldn't be required as the threads should pull up tight
Simon