Page 1 of 1
Scabby Alloys
Posted: 08 Feb 2006, 09:14
by tonytech
Before I bought my bus it had been standing for quite a while so there is a scabby patch on each alloy. I cant afford to get them skimmed so are there any tips for cleaning them up?
Tony
DIY
Posted: 08 Feb 2006, 12:30
by Arvi
get sand paper rub down each wheel
get silver spray or similar colour to van
spray wheels
get laquer give two to three coats
then polish wheels when dry to smooth surface otherwise dirt will easily stick to them
i did this to my BMW alloys came out as new
Posted: 08 Feb 2006, 12:39
by quiksilver_jake
good advice i did this with my first car an old skool mini they came up like new!! and my steelys on my first t25 lol