Page 1 of 1
Matt nato green
Posted: 28 May 2008, 13:09
by morzov
After various repairs my van is a patchwork of colours at the moment. I would like to paint it one colour - at least for this season. Don't have a lot of time available and thought Matt Nato Green would do the trick.
I've seen a few around and wondered what paint people used and how they applied it and where to get it from.
Posted: 28 May 2008, 14:06
by The_blue
I thought about this but some bloke 500 yards away has one in Mat green
Army supplies place maybe?
http://www.anchorsupplies.com/
E D I T
Found it!
http://www.anchorsupplies.com/paint.htm
Posted: 28 May 2008, 14:22
by morzov
Top man - thanks!
E D I T
B******S - just phoned them and none in stock and won't be for 4 weeks
Posted: 28 May 2008, 14:41
by The_blue
Where do you live?
Posted: 28 May 2008, 14:41
by R0B
Posted: 28 May 2008, 18:08
by morzov
Thanks - I'm in Bristol.
Posted: 28 May 2008, 19:04
by sezicoolcat
My van is done in M.V (I guess, Military Vehicle) Nato Green matt finish paint.
Put on with a roller.
I bought the van like it.
I have the rest of the tin in the van.
Try these guys:
www.kpaints.co.uk
email:
info@kpaints.co.uk
Tel:01482342216
Sarah
Posted: 28 May 2008, 21:00
by ELVIS
you used search facility ?
to answer a well asked post - DONT use matt paint - you will hate it ! it traps every bits of $hit/crap/oil/grease/dirt etc etc etc . unless you are a very bored/naughty squaddie dont touch it.
go for Satin - has the near dullness of matt but same ease of cleanliness/not looking $hit after 2 weeks as gloss does.
as rob says - fascinating finishes . properly mixed car paint.
and for millionth time - DONT USE IRR if you get some gratis from an MT!
Posted: 28 May 2008, 21:12
by R0B
oi..im not mocki..(hes much better looking)..
rob/mocki
Posted: 28 May 2008, 21:18
by R0B
Posted: 29 May 2008, 12:28
by skell
i have done matt and can confirm that bird "pooh" is near impossible to shift if you don't clean it off whilst fresh. same with flies on the front.
when its time for a new coat will go satin...
Posted: 29 May 2008, 15:25
by morzov
Thanks all - Satin it is then - if Ican get some that is!
Posted: 29 May 2008, 17:03
by ELVIS
WHS ^ 2.5l will JUST about give you 2 coats . 1" brush on shuts , 4" gloss rollers on body