Page 1 of 1
rs4 alloys?
Posted: 27 May 2008, 20:49
by mike25/90
17 or 18inch rs4,s , that is the question. will i have any problems with the arches after a 55mm low suspension slam, any one done the mod?
thanks, Mike.
Posted: 29 May 2008, 06:33
by Pepperami
I have 18'' RS4s
Posted: 03 Jun 2008, 08:10
by ASH
i ran them with a 60mm drop, no rubbing.
Posted: 03 Jun 2008, 08:52
by Pepperami
I have pulled the lip of the arches down on both sides after some rather rough roads in Cornwall. Bear this in mind if you fit aftermarket arches the originals were ok.
Posted: 08 Jun 2008, 15:58
by orangevanman
i have rs4's 18" on mine and mine has been dropped 60 at the front and 70 at the rear shockers and springs.
i have had my arches rolled as well but it still catches on full lock
this is my van with the wheels on
http://www.brick-yard.co.uk/forum/forum ... ?TID=14068