Club 80-90 Forums

Help.

Like a numpty I've mislaid the instruction leaflet, and I need to get my Propex compact 1600 re-installed in time for D-F..

The issue is the connections in the thermostat unit. It has a 4-way connector numbered 1,2,3,4, and a 2-way connector numbered 5,6 (also B+, B-).

I'm using the original propex loom which has a 4-way cable, with white, green, red and brown cores. Which core goes to which number ? I'm assuming that 5 & 6 are battery pos and neg ?

Cheers,

Andy

Hi Andy

I have the booklet somewhere at home, if you don't get answered before I will try and dig it out tonight...


Trust your well etc...

Hi Jake, yes thanks I'm well apart from being a bit obsessed with my current projects. Hope you're good too.

A helpful chap at Propex emailed me the manual, and I had word on the phone too, so I'll soon be sorted for heat.

Andy

Good news! My current project is work but that is supposed to kinda pay for the other fun projects...

Can you email it to me in case it is more complete than mine as I couldn't find mine...

Cheers

Mine is the 1600 compact but the stat has only 4 conections

The instructions show

Heater red to Stat red & battery + Terminal 1
Heater orange to Stat Green Terminal 2
Heater Violet to Stat White Terminal 3
Heater Black to Stat Brown & battery - Terminal 4