Page 1 of 1
Floor based (inset) - Table Foot
Posted: 27 May 2008, 14:13
by Titus A Duxass
Where do I get one of them there metal foots that you mount the table in?
I mean the one that is inset into the floor of the bus.
I've searched for "metal foot" "table foot", no joy so far.
Posted: 27 May 2008, 15:06
by Willoughby
Posted: 27 May 2008, 15:10
by Titus A Duxass
MurkyBuckets!
Posted: 06 Jun 2008, 07:20
by Titus A Duxass
Okay, I have an alloy table foot. Actually I don't have in my mitts yet.
I couldn't find an alloy one over here, no more Reimo ones to be had.
But JustKampers came to the rescue.
Has anyone got any fitting tips?
What size hole or holes,
How did you attach it firmly,
Positioning, whereabouts (yes, I know - on the floor).
Is the hole drilled so that the foot contacts with the metal floor pan?
Etc, etc.
Donkeyshite.
Posted: 06 Jun 2008, 15:06
by ermie571
ours was drilled so that the recess went though the floor (wood and metal beneath) and the lip screwd into the floor.
how do I know......coz when it went in for welding after interior stripped out , the welder asked hubby if he wanted the holes sorting in the floor pan...hubby said yes....van came back with hole neatly welded up...
result, one table, leg and mount in the garage..... not too bothered as I found it terribly inflexible, and more often than not in the "wrong" position!
Em
x
Posted: 07 Jun 2008, 06:24
by Titus A Duxass
Cheers Em,
not too bothered as I found it terribly inflexible, and more often than not in the "wrong" position!
- Anybody want to buy a foot?