Page 1 of 1
Bell housing needed
Posted: 01 May 2008, 22:59
by maddog334
Hi All
I am desperatly after a diesel bell housing and starter motor if anyone can send me in the right direction ,I would be extremely greatfull
.
Martin
Posted: 03 May 2008, 09:48
by maddog334
also I have read on some posts that it is possible to cut down the input shaft from a petrol box with a grinder ,can someone please confirm that this is ok to do.
Many Thanks
Martin
Posted: 09 May 2008, 20:06
by silverado
maddog334 wrote:also I have read on some posts that it is possible to cut down the input shaft from a petrol box with a grinder ,can someone please confirm that this is ok to do.
Many Thanks
Martin
Hey up pal give volksheaven a ring they might have a bell housing and a diesel input shaft and starter i have them but gona save them for my next one.ps dont forget the spigot bearing for end of the shaft when you get round to doing conversion.Ive finished my conversion i used 2.0.l audi abk block and digifant 1.8head.
VOLKSHEAVEN 01302351355
Posted: 13 May 2008, 09:35
by monkeynut
Is there nowt on Flea bay ?
try here too
http://www.partsemporium.co.uk/
Posted: 14 May 2008, 21:18
by maddog334
Hi All
Thanks for the advice, I now have all the parts thanks to a friendly ebayer.
Many Thanks
Martin