Club 80-90 Forums

I was removing the rear seat belts which were attached to the front seat belt. Well did the bolt just not go and sheer off, now I have no front passenger seat in the T25.

How do I get the remainder of the bolt out.

can you weld anything to whats left.or you may have to drill a hole in whats left.and thread the hole with a left handed thread.insert a bolt and hope to get it off that way....

Like ROB says, and if you are going to use the drill and twist out method,

HERE

is a good write up, and..Here in the wiki

google for 'screw extractors' if you need to find somewhere to buy them.......... we used to call them 'Easyouts'

Mike

Thanks very much for the useful advice and link.