Page 1 of 1
speedo
Posted: 20 Mar 2008, 23:48
by airdale1000
hi
have just bought a 88 trident, the speedo works but the milage is not moving. any ideas?
Posted: 20 Mar 2008, 23:58
by Mocki
a spot of superglue on the end of the blue cog on the end where it joins the shaft, should solve it........ be gentle taking it to bits tho.....although you have not a lot to loose, its no good as it is!
You'll be lucky
Posted: 21 Mar 2008, 16:20
by Red Westie
I've repaired several like this, basically the gear starts moving on the shaft and drops out of mesh.
OooPer glue repairs them for a bit but everyone I've done has failed again within a matter of months.
Replacent head I'm afraid.
Martin
Re: You'll be lucky
Posted: 21 Mar 2008, 17:40
by airdale1000
Red Westie wrote:I've repaired several like this, basically the gear starts moving on the shaft and drops out of mesh.
OooPer glue repairs them for a bit but everyone I've done has failed again within a matter of months.
Replacent head I'm afraid.
Martin
where do you get them from.
cheers tony.