Club 80-90 Forums

apparently the offset is et 23. this is wrong for t3. according to brickyard website you need between 30 and 40. i have been running et 12 for the last 20k with no probs other than fronts catching arches with 60mm drop.now using standard springs again. i have spoken to jk about these wheels and they reckon they have one of their vans on 17s with 60mm drop, maybe check tyre size for the front?. i do wonder if there is plenty of aftrermarket wheels available if we need et30 with(is it112pcd?)

Between ET30 and 39 is just a guideline as the ET30 refers to 6"X14" alloys and the ET39 is for 5.5"X14" steels wheels which were factory fitted.
If fitting wheels any wider than 6" keep as close to ET30 as possible on the front but ET23 is perfectly ok on the rear if no bigger than 8" wide.
Oettinger,Projecktzwo,ARC all used ET23 wheel on T25's as standard.