Page 1 of 1
viscous coupling
Posted: 13 Mar 2008, 11:38
by dave friday
Hi all can i remove the vc and still use the van?
Ta.
Posted: 13 Mar 2008, 13:27
by KarlT
Yes.
Posted: 13 Mar 2008, 13:27
by KarlT
Yes.
Posted: 13 Mar 2008, 13:50
by more speed
Wouldnt it be better to just remove the prop until your ready to replace the vc.
Posted: 13 Mar 2008, 14:22
by dave friday
Thanks,my idea is to have the vc ready for re-furb or exchange, and pop in to one of the people who sell them on my way to the UK.
Posted: 13 Mar 2008, 17:33
by toomanytoys
If I can get a couple of units to put in to my man then drop in.. not far out of the way if you come up past Limoges........

Posted: 13 Mar 2008, 18:02
by Russel
Do not refit the propshaft without the VC in place.U will cause damage to ure front diff assembly.
Posted: 16 Mar 2008, 01:04
by HarryMann
Good point...
So I conclude it must have been done at least once

Posted: 16 Mar 2008, 07:38
by Russel
Not that ime aware off but if you look at the front diff construction it cant do anything else but cause damage.
Posted: 16 Mar 2008, 10:46
by HarryMann
Yes, I suppose in a way that one you helped me replace at CF without much in the way of internal splines was acting a bit like it wasn't being 'very supportive' ?
The vibration driving down there was something to behold
