Page 1 of 1

toe in measurements and replacement tyres

Posted: 08 Mar 2008, 12:54
by Dave W
Both my front tyres have worn on inner edges :cry: :cry: :cry: , suspect toe in is out as tyres are correctly inflated and suspensions fine. Does anyone know what the correct toe in measurements are for a 1990 "jx" engined westy atlantic. On a seperate note can anyone recommend any new replacement tyres and approx cost (standard size 185 14) that wont cost an arm and a leg!!!!!!!. Someone mentioned that avon supervan`s are good????.

Settings

Posted: 08 Mar 2008, 13:39
by Red Westie
Wheelbase 2460
Front track 1570
Rear track 1570
Wheel nut torque 180 Nm
Track rod lock nut 50Nm
Toe in 2mm±3.5mm 0°20'±30'
Camber 0°±30'
Camber tolerance left to right. 1°
Castor 7°15'±15'
Castor tolerance left to right 1°
Toe out on turns @ 20° 1°10'±20'

These settings are for standard van (not lowered)
It may also be advisable to DOUBLE check the TOP wishbone bushes as these are particularly prone on the T25.
Martin

Toe in measurements and replacement tyres

Posted: 09 Mar 2008, 16:19
by BMEC
I can recommend Hankook RA08 which are starting to be fitted on many vans now as OEM equipment.
I got four 185 14C fitted and balanced for £188 by Camskill at Whitehaven. They also supply direct for your own fitter at £40 each I understand. (They are on the internet if you google)
Having had them now for over four months they seem to be better than most other tyres (including Michelin, Avon and Goodyear) that I have had on my T25 since new.

tyres

Posted: 09 Mar 2008, 16:59
by bourneid
I love AVON tyres excellent quality and durable, shop on tinternet and you can get them for £60-£80 each..