Page 1 of 1

To baffle or not to baffle. That is my question

Posted: 20 Feb 2008, 18:43
by Bendyknees
My baffle has broken in my exhaust again. It sounds like a cow bell being shaken to the rythem of some dodgy hardcore techno tune.
I fitted the exhaust (jk) nearly 2 years ago as the one that was on it had the same fault. The exterior of the box is perfect so im thinking rather than buy a new box, just de-baffle it. tis only a bit of pipe with holes in inside. Then if i got a loud exhaust i can stick my V12 GTI badge on the back next to my Made for lovin not for speedin sticker :D

Posted: 20 Feb 2008, 19:35
by Ian Hulley
The old way on $ierras when the baffle came loose was to hit it with the ball part of a ball-pein hammer, this dinted the outer and re-trapped the baffle.

Ian.

To baffle or not to baffle. That is my question

Posted: 20 Feb 2008, 21:28
by meggles
Ian Hulley wrote:The old way on $ierras when the baffle came loose was to hit it with the ball part of a ball-pein hammer, this dinted the outer and re-trapped the baffle.

Ian.

Buying a Sierra usually meant that YOU had had a hit on the head with a hammer :rofl

Posted: 20 Feb 2008, 21:49
by Ian Hulley
Not if you had the top of the range ones :wink: They still rotted though :cry:

Ian :twisted: