Page 1 of 1
alloy width?
Posted: 18 Feb 2008, 19:49
by BIG D
ive been looking at the mercedes alloys found some pcd =112 5 stud and the offset is 35 the width of the wheel with tyre on is 9" is this way to big to get past sliding door if so does anyone no maximum width,thanks dave
Posted: 22 Feb 2008, 23:16
by R0B
seer g60 steves reply here..
https://club8090.co.uk/forum/viewtopic.php?t=30269
the width of the wheel with tyre on is 9" is this way to big
wheel width
Posted: 24 Feb 2008, 21:48
by rab-rulez
i am curently running on et 35 wheels that are 9 " wide with 245 40 18 tyres on with a 18mm spacer and my door just touches the tyre. although my current slider is rotten at the bottom and lyes a bit further in than normal. im awaiting delivery of 2 10" rears et 15 im hopeing these bolt on with no spacers if i need to i will do it . i can get you custom spacers made if you need any. strange widths not a problem can also get hold of staggered width alloy wheels hope this helps you out