Page 1 of 1
The old favourite............Offsets.
Posted: 16 Jan 2008, 19:49
by KarlT
Had a look at wiki. Now the factory steel wheel off-set should be ET 39.
If I put some alloys on with a ET 29, does that mean I need a 10mm spacer to bring us back to ET 39?
Posted: 16 Jan 2008, 19:54
by syncrodoug
No, that would give an ET of 19!
Posted: 16 Jan 2008, 20:01
by Ye Olde Syncrospares
et39 is the most inset that can be used sensibely et 31 or 32 is ideal,cj.
Posted: 16 Jan 2008, 20:21
by KarlT
I've seen some with an offset of 24. Does that mean they would be too far in or too far out?
Still
Posted: 16 Jan 2008, 21:54
by syncrodoug
Too far out.
Posted: 17 Jan 2008, 10:24
by Ye Olde Syncrospares
man
Posted: 17 Jan 2008, 15:40
by toomanytoys
Depends on how wide the rim is... the wider the rim the less offset as you can only go one way without hitting the suspension..
Factory alloys are 6j rim and et 30...