Page 1 of 1

Cooling Fan

Posted: 15 Jan 2008, 15:32
by Aezmac
Hi, does any one know of a simple way to check a cooling fan, that isn't fitted to a van, is working? Thinking of connecting to a battery somehow, but didn't want to fry anything. :oops:
Cheers.

Posted: 15 Jan 2008, 16:18
by kevtherev
Look in the haynes for the correct colour code for live and ground ...then just attach it to a battery

Posted: 15 Jan 2008, 17:34
by toomanytoys
Its easier than that... take off lower grill on the rad is the fan switch.. pull the plug, check you have voltage on one of the wires (middle IIRC) then link out that to one (if three wires in there or the other if only 2) the fan should come on either at low speed or high speed...(3 wire)

but, the fans really dont come on for ages.. even in summer...

Posted: 15 Jan 2008, 18:02
by kevtherev
Hey TT it's not in the van mate :D

Posted: 18 Jan 2008, 12:11
by Aezmac
Cheers for advice, will have a look this weekend. I don't know if it's just me :roll: , but i can't make head nor tail out of the wiring diagrams in the haynes manual. :oops: Are the later manuals printed in colour? Haynes motorcycle manuals wiring, seemed a lot easier to understand.

Posted: 18 Jan 2008, 12:32
by Titus A Duxass
Keep a good hold of it when you connect it otherwise it'll be off round the room/garage like a mad womans sh1te!

Posted: 18 Jan 2008, 12:40
by ermie571
Titus A Duxass wrote:a mad womans sh1te!

:shock: :shock: good grief, Titus.....what sort of life experiences have you had????? :shock: :shock: :wink: :D

Em
xx