Page 1 of 1
merc alloys .
Posted: 31 Dec 2007, 17:33
by dp67bug
hi there can any one tell me what size drill bit is needed to drill the alloys as i want to fit them on my t25 .
also they are 8j and 16 inch in diameter what size tyre would be needed its only lowered 30 mm was thinking of 195/70/16 .
any ideas ?
.
Posted: 31 Dec 2007, 19:26
by youthy giblets!!!
14mm or 14.5mm best, not sure about the tyre size
Posted: 01 Jan 2008, 12:11
by autocamp
I have 195/65/16's and they give about the same rolling radius as stock wheels , with the added advantage of being available in commercial form
Posted: 01 Jan 2008, 14:30
by g60steve
autocamp wrote:I have 195/65/16's and they give about the same rolling radius as stock wheels , with the added advantage of being available in commercial form
195 commercials will not go on 8" wide wheels....
For 8" x 16" alloys use 225/55/16 extra load tyres(92+ load rating...higher rating the better).Exactly the same rolling radius as the standard wheel/tyre combo.