Page 1 of 1
Range Rover Seats
Posted: 31 Oct 2007, 17:10
by S.Richardson
Can Range Rover Classic seats fit does anyone know?
Thanks
Stu
Posted: 31 Oct 2007, 18:38
by scoobydrew
Hi Stu,
Yes they will fit and look quite good but you will either have to bolt to the floor or change the runners to T25 ones.
Posted: 01 Nov 2007, 08:03
by Gunslinger
I have some to put in mine but haven't done them yet.
I'll let you know how I get on. Will be a couple of months yet though
Stu
Posted: 02 Apr 2008, 10:15
by Gunslinger
The Range Rover seats are now in and they look great. The only real drawback is they sit higher than the standard ones and as I'm over 6ft my head touches the roof lining unless I recline the seat slightly.
I have mounted them using the Range Rover runners despite them being approx an inch wider than the standard. The passanger seat is bolted straight onto a VW original swivel seat base so that was easy. The drivers seat was a tad more difficult as it is bolted to the original seat box section and it was a real pig to get a spanner under it but with a bit of perseverance I got there. The outer bolts go straight through the floor and are bolted up under the arch. All in all a relatively straight forward job and worth it for the comfort and look