Page 1 of 1
Gear linkage issues
Posted: 08 Oct 2007, 16:02
by Bendyknees
Was comin home from the matchmaking festival yesterday when i lost 1st and 2nd gears

Nursed the van home and rolled under it. The problem seems to be at the gearbox end where the nylon ball engages into a cup thingy

You can see the wear in it, and when i padded it out a bit it seemed to work ok. Are these still available new? or does some1 have a good 2nd hand 1? need to get it sorted as round here is full of big hills and the 1.6 non turbo struggles at the best of time.
Posted: 08 Oct 2007, 16:53
by Hacksawbob
from volkswagen "gearshift lever" pn 251 711 221 F £20.42 plus the vat.
probably a good idea to get a new rubber bellows 251 711 167 E £2.53
I f you want a new cup too I have one here for a fiver plus the P+P
Posted: 08 Oct 2007, 17:01
by Bendyknees
Coolio

The ball is fine its actually the cup that has the wear in it. I did have another cup but its off a petrol box and it is about 10mm shorter than the desiel 1. If urs is a desiel 1 i will take it. Send me ya details and i will get sum cash sent to ya.
Posted: 08 Oct 2007, 17:48
by Hacksawbob
sorry I thought they were the same its a petrol