Page 1 of 1
Standard wheels and 60mm drop?
Posted: 22 Aug 2007, 10:44
by booster24
Is it reasonable to lower by 60mm ( the just campers kit) and with new shocks and keep the standard wheels and not have any problems on a camper?
Cheers
Posted: 22 Aug 2007, 11:35
by ringo
Yes. I did it for about 2 days - then put alloys on...
Ringo
Posted: 22 Aug 2007, 12:10
by booster24
Cheers Ringo, I guess that there were'nt any problems but you just prefered the alloys. Thats cool. I am using bueaty rings and dome chrome caps to keep the classic look, hence the standard wheels.
Cheers
Posted: 22 Aug 2007, 14:51
by shepster
A lad on here (Richnewton) has this setup but found the drivers side front wheel would rub on the underside of the arch when going over bumps, it all depends how heavy your van/you are really.
Posted: 23 Aug 2007, 12:23
by PEET
I did it for a year or so (-60mm JK kit also) pre transforming Elly had no problems, then i fitted smaller tyres for some stoopid reason, looked ok n drove fine!
[IMG:640:480]
http://i63.photobucket.com/albums/h156/ ... d_Elly.jpg[/img]
