Club 80-90 Forums

Have to fit some new window scrapers, any tips please on fitting!

Thanks

Ken

watch out the metal lugs on the underside are sharp! other than that it's easy, I used a bit of superglue to fix the ends to the ajoining bits

I did one of mine two years ago but don't remember finding any metal lugs. Later versions may be different ??.
I found the easiest method was to undo and drop the glass into the bottom of the door.

If your fitting both bottom and top be careful of fitting them right without trying to slide them up tight as the metal strip inside will bend/kink if you try this, been there and got the kink to prove it and at 28 quid a shot for the top one it's going to stay kinked.