Page 1 of 1

bodywork Q, rear arches

Posted: 03 Jan 2006, 14:02
by ol bluey
how difficult are these to remove and (presumably) weld new ones on?

also, are they a git to remove if you have no power, ie the van in the scrappers i was going to cut them off from?

Posted: 03 Jan 2006, 14:24
by Dud
Wouldn't put too much effort into getting them off if you don't have power. Think you can get brand new ones for about £30 from JK.

Posted: 03 Jan 2006, 15:57
by veedubtub
Hello,
Once you've found out how to change an arch can you tell me please as i need to do this too. i'm not sure if you unbolt them or cut them out.

cheers.

Posted: 03 Jan 2006, 16:04
by Aidan
You cut them out - imle relace the whole side panel, it's not that expenseive from JK (there's were galvanised last time I saw them)or other suppliers and you then get rid of a couple of seams that will come back to haunt you otherwise.

Posted: 03 Jan 2006, 22:11
by ol bluey
cheers for that,
have been wondering if it was worth the hassle to change them as my van has previously had a thump before i had it but ive managed to knock most of it out as was deciding whether to reshape the panels properly with filler or replace them