Club 80-90 Forums

Posted: **01 Jan 2006, 15:58**

thinking of getting granada alloys for van, there used to be info on them on the web site but dosnt seem to be there now so the question is

does the center need machineng out to fit the centre of the wheel.

cheers

Posted: **01 Jan 2006, 16:08**

the centre of the wheel wont need machineng to fit buthe centre caps of the alloys wont fit!! you'll need longer studs and bolts and collars to make them fit safely! tho they will fit without all of that!!!

Posted: **01 Jan 2006, 16:13**

cheers dave, the rs ones look nice and a a reasonable price, always need the bargin as new baby on way and van is now my luxury item. good news though

any idear what size spacers???

Posted: **01 Jan 2006, 18:02**

you won't need any spacers!!!! unless you want the centre caps to fit then your looking about inch and a half!! i made do with no caps at the frount cos of the dust caps and drilled the caps for the back so the hub nuts could stick out!!! congrats on the bab!

Posted: **01 Jan 2006, 18:37**

so whats the collar part then? thought you ment spacer

Posted: **01 Jan 2006, 18:45**

sorry no! the collar goes round the head of each bolt, or nut, because the hole in the alloy is a little to large for the vw bolt size, the collar is like a domed washer!!

Posted: **01 Jan 2006, 18:51**

ok i get you, will have to look into this bit some more, was gunna get bolts in studs n nuts from fireturk "think thats his name" sure he can sort me out the right bits, thanks for your help

Posted: **01 Jan 2006, 19:14**

yeah, tell him your fitting granny whells and he'll sort you out! if you can't find him on here he goes by the smae name on eaby!!

Posted: **01 Jan 2006, 21:35**

Wasn't shepster selling granny alloys a week ago?

I think the threads still there they came with tyres too £150 was the price me thinks

Posted: **01 Jan 2006, 21:44**

look here

Posted: **01 Jan 2006, 22:56**

yeah there nice, n something i can afford, the thread mentioned machining the centre. do you think that needs doing, the other guy was pretty convinced they didnt,

also thread mentioned merc ml alloy, anyone know whats involved with them, smaller tyres i would think???

this has to be the year for new wheels

Posted: **02 Jan 2006, 09:59**

.... look here

alternative wheels

The granny wheels would not need machining as they are already fitted to the van..if you bought those.
I've seen these wheels and they're in fine condition
why not give shepster a call (e-mail) and see if they're still available?

The merc alloys mentioned in the thread are mine that I bought , they are 16"and need no machining just longer bolts and spacers

Posted: **04 Jan 2006, 08:42**

As Kev says they are still for sale, i have mailed you so give me a call.

Shep