Club 80-90 Forums

Good afternoon all.
I have had the bus in at a local garage a couple of weeks ago.
They were trying to set up the carbs and the timing.
Since then I have been all the way up to Brora and back to Stirling.
But! the engine is running like a bag of bolts.
I found that the Vacuum advance and retard pipes hade been linked and that they had tried to set the tick-over up on the carbs. Not on the slow running jet on the LH carb.
The hole thing is a mess.
Can anyone tell me the basic setting for the mixture screws at the butterfly ?
Or is there anyone in central Scotland who nows how to set these up properly.

Silverfoxfintry No 458 Stirling.

sorry to hear about your woes
Only 3 guys I know up your neck of the woods , Give a shout for Spannarack he is in Glasgow , and ( Ian, Mc.gill5,+ Russell Syncro nutz) he is in Shots (trader + conversions etc) also another friend Cumbrian Kieth.

You could also try

Dennis Dunlop in Ayr 01292 619 801

or

http://www.busstopecosse.com/

Never used them BUT I know plenty Aircooled owners who have and they only have great things to say about both

Basic setting for those jets is 3 turns out from fully in (carefully!)