Page 1 of 1
Posted: 11 Jul 2007, 16:20
by Hacksawbob
mine is installed exactly like this.
Posted: 11 Jul 2007, 18:56
by Hacksawbob
HT leads are swapped to match the 180 degrees that the dizzy is. Thats what the mechanic told me He said that the dizzy had been rebuilt incorrectly but I think he did the same thing as you.
Posted: 11 Jul 2007, 19:57
by Ye Olde Syncrospares
take drive out and start again,itll only cause problems in the future,cj.
Posted: 11 Jul 2007, 21:57
by Hacksawbob
what problems can I look forward to?
Posted: 11 Jul 2007, 22:02
by andysimpson
Hacksawbob wrote:what problems can I look forward to?
None with a waterboxer but it would kill an Aircooled.
Posted: 12 Jul 2007, 08:27
by Hacksawbob
As Andy says on a water boxer the Dizzy is uniform, on Aircooled I think no3 is advanced or something, So I guess it will only cause problems if a mechanic forgets which one he pulled off and puts them back by the book. maybe mark up the dizzy cap with cylinder numbers.
Posted: 12 Jul 2007, 19:33
by Ye Olde Syncrospares
itll cause confusion,thats all,cj.