Page 1 of 1
Granada Alloys
Posted: 04 Jul 2007, 07:46
by jonno
Has any one fitted a set of Ford Granada/Scorpio 6 spoke alloys,the ones with the large centre cap hiding the wheel nuts/bolts?
Bit concerned about been able to fit the large centre cap!
Will try to post a photo[/img]
Posted: 04 Jul 2007, 11:58
by aussie_b
Mine has 6 spoke Granny alloys !!
And guess what, it's got no wheel centres.
My thoughts were to get a set of Granny wheel centres and cut a suitablely sized hole in them, I was then going to try to get some sort of cap ie maybe from a spray can and slip it through the new hole, thus making a complete wheel centre.
An old mate did this on his mini and once he'd put a stick on badge on the cap, you couldn't really tell it wasn't original. I guess the trick is not to destroy your caps in the process.
Granada alloys
Posted: 04 Jul 2007, 12:14
by jonno
Is it just the fronts that you cant fit the covers?
Did you need any spacers or extended studs/bolts?
Going to have a go at putting them on when it stops raining, if it stops!!
Cheers aussie might try the cap in middle..
Posted: 04 Jul 2007, 13:24
by aussie_b
I took off my rear wheel last night (at home in sunny Reading, had a 15minute no-rain window), no spacer on the rear wheel although you should get some extended studs.