Club 80-90 Forums

I also posted this in alternaltive engines section but I think tech q&a may be more suitable)

I'll finally be taking out my 1.6D cs and fitting my 1.9 1y over the weekend and I'm just ordering in all the parts I need. I'm having trouble identifying what driveshaft cv boots to order from Just Kampers can anyone point me in the right direction from the choices here?

http://shop.justkampers.com/index.php/cPath/2_1024_1153

I'm also fitting/replacing

new exhaust system
new glow plugs
new cambelt
new oil/air filters
new fuel filter
and relacing all the gearlinkage boots and bushes
Engine/gearbox oil etc

Anything else recommended???

I presume I will need to replace the engine mounting bolts - can anyone point me in the direction of somewhere to get them?

Never done this before so expecting a steep learning curve, if anyone has any handy hints they'd be greatly appreciated!

What choices? the boots are the same for T2 and T25... just what do you actually need?
If you have a ripped boot you need a boot kit.. with cv grease and clips as you will need to take the joint off to get the boot on.. so cleaning and regreasing is required.. or of the cv joint is also worn then the joint kit..
Just getting a boot if ok.. if you have CV grease and dont mind reusing the old clips etc...