Club 80-90 Forums

I have panel van which the previous owner installed some windows on
See pic



The windows have begun to rust where they where put in so i want to take these ones out and fit new bigger ones.

I have found this company that supply windows.

http://www.leisurevehiclewindows.co.uk/

Has anyone used them before?

They do t25 windows which are 1067 x 429 which is approx an inch longer and wider than the current windows.

They also do t4 windows which are 1047 x 444

Do you think i would be better off going to the t4 one's as most of the rust is at the top and botton not really the sides.

Also how hard is it to fit new windows, is it something i can do myself or should i fork out for someone to do the job for me.

Thanks in advance

Matt

Thought that was my van at 1st.

I've got the same problem.

Fitting isn't to hard. Took 2 of mine out and checked how bad the rust was (it's bad).

Will keep an eye on this thread

RAC windscreens wil S+F windows
any size/shape (within limits) if its flat.

the limo black ones in Nev's crewie
were done outside his house, had to be
custom cos the doors were originally
solid so non-standard glass size.

cheers guys

guz: any idea of cost?

IIRC over £100 but not too much,
would be extra for the limo tint but
IMHO worth it, new seals included.

I have a set of curved windows just removed from a devon (originally a panel) need new window rubbers but have got the internal rubber protection bits. Looking for about £60 for the set of four.