Club 80-90 Forums

I know one goes on the left carb, one on the tickover mix to right carb and one from the hot/cold air mixer (plus 2 holes on the air filter cover)

But which goes where?



This is from the wiki but can't be right.

The temp guage thing on the filter lid is bypassed.

The carb to advanced makes sence but which goes to the retard and how is the air filter cover ment to look?

You could try here, its foreign but there's a pipe layout pic near the end

http://www.google.co.uk/search?sourceid ... le+cu%2fcv

Is there a way to have the exact info that's here but in English because the pics and info look smack on....
Anybody???????

Yeah, the picture from the wiki is wrong.

The pipe coming from the retard part of the vac advance module should go to a t-piece, one pipe going to the temp thingy on the airbox, the other going to the balance pipe.
The temp thingy should then be linked to the vacuum valve on the entrance to the airbox.

The one in the picture has been set up to bypass the warm air intake.

Thought so but which conector is which on the air box?

Right side (brass) to air intake?

toolsntat wrote:You could try here, its foreign but there's a pipe layout pic near the end

http://www.google.co.uk/search?sourceid ... le+cu%2fcv

Is there a way to have the exact info that's here but in English because the pics and info look smack on....
Anybody???????

Thanks!

page 30!

will look into translation.

This pic is better for the correct vac pipe layout: