Page 1 of 1
Fridge installing - not standard
Posted: 25 Apr 2007, 12:20
by Louey
using the image above - thanks Dubkop
I've got myself a RM120 Gas and 12v fridge and I need to install it in the middle of my kitchen unit, which is roughly where the gap is in the above unit.
Any ideas about venting it please?
(Sorry Headly Pete, I can't afford to pay to get it fitted at the mo)
Posted: 25 Apr 2007, 12:56
by Mocki
you'll have to have a long vent accross and out the side then?But you'll have to go out the "b" pillar at 2" above the height of the outlet of the fridge - not sure if that wold be right?
Posted: 25 Apr 2007, 13:33
by Louey
cheers Steve.
Am I right I would need a hole in the floor too?
Posted: 26 Apr 2007, 21:35
by dalmationman
My fridge installation has a hole in the floor.
Posted: 27 Apr 2007, 17:57
by DiscoDave
if i were you i'd be looking to vent out of the roof, a nice chrome exhaust would be nice!
Posted: 27 Apr 2007, 18:54
by Mocki
ole disco could be onto something there !
yes you need a vent in the floor, like in your gas locker too.......
Posted: 28 Apr 2007, 11:58
by timber technician
Bay window westy B pillar vent. Maybe
