Page 1 of 1

Fog light switch doesn't work..

Posted: 19 Apr 2007, 21:50
by HarryMann
Yes, the lower one on the rhs of speedo pod, 3 position with tell-tale..

Bulb at back appears fine, but despite checking Fuse No. 6 (OK) can find no power applied to the grey or grey/yellow or brown (tell-tale) wire into the switch....

Confused - Heeeelp! - Any ideas?

Posted: 19 Apr 2007, 21:55
by andysimpson
I think the wire for the fog comes out of the back of the main light switch, check for the wire there and see if it gets 12v with ign on and dipped lights on.

Posted: 20 Apr 2007, 07:25
by tonytech
The telltale in my fog light switch was intermittant. I needed to to bend the contacts where the bulb pushes into the switch to fix it.

As above fog lights require side lights on.

T

Posted: 20 Apr 2007, 07:42
by HarryMann
As above fog lights require side lights on.

Duh! Wonder if MOT man knows that :)

Thanks very much !